Monday, 28 March 2011


I know Eleanor has already draw one on Autocad but I did this before I found out, The scale is 1.5cm - 1ft all the fixtures and items in the room have dimensions for them as well as each room.

Living room: w = 10ft l =12ft
Bedroom: WD = 10ft WB=7ft l=12ft
Windows W=2.16ft (27") l=4ft (48")
Doors: W=2.416 (29")
Fire place: W=3.5ft (42") D=12"
arm Chairs: W=3.4ft D=2.9ft (35")
Dining Table: W=3.5ft(42") L=4.5ft (54")
Chairs: W=1.75ft(21") D=1.75ft(21")
Sofa: W=46ft(56") D=2.6ft(32")
Writing Desk: W=5.5ft(44") D=2.416(29")
Bed = L=6.66ft(80inch) W=3.33ft(40")

Any of these can be changed of course but it all fitted together when I drew it and everything is based on real things. hope these are ok I will bring in to Uni.
Posted by at

5 comments:

  1. Sarah L29 March 2011 at 00:21

    You forgot to write the height of the doors

    ReplyDelete
  2. Jess29 March 2011 at 00:48

    I know couldn't remember how tall the boards were.

    ReplyDelete
  3. emma.c29 March 2011 at 08:10

    when we did the scale model thing today i did the bed 6ft long by 3ft wide rather than 6.66 ect .. if that matters?

    ReplyDelete
  4. Jess29 March 2011 at 09:38

    no thats fine don't worry, it all fitted in the end

    ReplyDelete
  5. Sarah L30 March 2011 at 02:00

    The sizes of everything changed a bit so it was easyier to build.

    ReplyDelete

Subscribe to: Post Comments (Atom)